Description

Trailer for 35- and 50-foot trucks.
The trailer features an all-steel construction and is available in two lengths (35 feet and 50 feet), 2 deck widths (96 inches and 102 inches), and 4 axle configurations (tridem/tandem with single tires – tandem with dual tires/single). The suspension consists of sliding leaf springs and has no shock absorbers, while the tandem and tridem axles feature balance beams connecting the leaf springs, which is very similar to a standard tipper trailer. Trailer variants have a payload capacity ranging from just under 2.5 tons to over 6.6 tons; all are identified by a unique VIN plate on the front of the trailer for each included configuration. It is also equipped with custom-built 16×6 modular steel wheels, available with zero offset for single tires and a 5.35-inch offset for dual wheels, available in 4 finish options along with custom tires.
The trailer is equipped with two 9-foot aluminum ramps located at the rear of the platform and operated manually. Below is a step-by-step guide to using the ramps (watch the video below the spoiler!):
The trailer is parked on a relatively level surface and has come to a stop.
The ramps are unlocked by pressing the release latch on the locking pins.
The ramps can be held in place using the unit’s grip mechanism either in free-cam mode or in walk mode, and then extended and aligned under each deck. The left ramp operates only with the left side of the deck and vice versa.

Press the trigger on the deck, and the ramps will attach to the deck. If they do not lock into place, nudge them with the node grabber until you hear a click.
The ramps can be moved left or right depending on the vehicle being loaded, and the vehicle can be loaded.
The ramps are detached using the same trigger on the rear edge of the deck, then slid back to the center, raised, and retracted into the inner deck. Placement does not need to be precise as long as it is within the deck.
The locking pin triggers are pressed again, the ramps slide, lock into place, and are securely stowed.
In Version 1.4:
Hello everyone. I tried to fix the issue with ramps spontaneously sinking through the ground. Everything should work as intended.

⭐ Popular Mod! More than 140 downloads this week!

👍 Someone liked this mod 1 day ago!

💡 Others also downloaded: 35+ Wheel & Tire Pack Sema Edition [0.36], RAM 2ND GEN Cummins [0.38], Ultimate Silverado Mega Pack 2.0 [0.38].

Compatibility: BeamNG 0.38, 0.37, 0.38 Other

Author: RenAzuma66

Make a difference – rate mods!

4.6 out of 5 stars - 37 votes

How to install this mod (Full installation guide)

Download the mod (ModsHost download guide).
Find the mods folder on your computer
- Windows – Documents/BeamNG.drive/mods
Copy the downloaded file to your Mods folder
Launch the game and enjoy your mod!

Problems? Let us know in the comments! Your feedback helps modders improve the mod. Also, be sure to check the comments section - other players may have already shared solutions to common issues.